How to measure a car reveal cover

Measuring a car reveal cover can be tricky, but ensuring that the cover fits your car perfectly is essential.

How to Measure a Car Reveal Cover

To measure the cover’s width, you will need a measuring tape. A soft measuring tape is recommended to avoid scratching the vehicle, or you could use a piece of string and then measure the length of the string. Start by measuring from the passenger side floor and then go up over the side, across the roof, and down to the driver’s car floor. This will give you the width of the cover.

To measure the length of the cover, start from the floor of the front bumper, and go up and over the bonnet, roof, and tailgate lid down to the floor. Then, come down across the rear bumper to the floor. This will give you the full dimensions of the fabric needed. It is important to note that the corners of the car, such as the front wings and rear quarter wing panels, will need the fabric cutting to rounded corners to prevent gathering or too much material in these areas.

Suppose you are not comfortable with measuring the cover manually. In that case, you can also use a scaled vehicle template and software like Adobe Illustrator to measure the sides, roof areas, bonnet areas, and boot lid to create a template of the required area. Following these steps, you can ensure that your car reveals cover fits perfectly.

Why Measuring a Car Reveal Cover is Important

Measuring a car reveal cover correctly ensures that the cover fits over the car and provides complete coverage. 

It is also important to note that the corners of the car, such as the front wings and rear quarter wing panels, will need the fabric cutting to rounded corners to prevent gathering or too much material in these areas. This ensures that the cover fits correctly.

Scaled vehicle templates and software like Adobe Illustrator can also provide approximate measurements of the sides, roof areas, bonnet areas, and boot lid to create a template of the required area. This method can be helpful when measuring irregularly shaped vehicles.

In conclusion, measuring a car reveal cover ensures that the cover fits correctly and provides complete coverage. 

Creating artwork for Rounded Corners

You will need to create artwork with round corners on the front wings and rear corners. Paying attention to the corners of the car, i.e., the front wings and rear quarter wing panels, is essential. These areas require the fabric cutting to rounded corners to prevent gathering or too much material in these areas. Depending on your vehicle’s size, the circle used to create the corners would be around 2 / 2.5m in diameter.

Using a Scaled Vehicle Template

When measuring a car reveal cover, one way to get approximate measurements is to use a scaled vehicle template. This method can be useful when you don’t have access to the vehicle or need to create a template for multiple vehicles.

A scaled vehicle template is a digital representation of a vehicle’s dimensions at a specific scale, usually 1:20. To use a template, you will need software like Adobe Illustrator that allows you to measure the sides, roof areas, bonnet areas, and boot lid to create a template of the area required.

Once you have the template, you can use the measuring tape tool in Adobe Illustrator to measure the width and length of the car reveal cover fabric.

Conclusion

In conclusion, measuring a car reveal cover is an essential process that requires accuracy and precision. By following the steps mentioned above, one can easily measure the width and length of the fabric needed for the cover. It is important to consider the corners of the car and use a soft measuring tape to avoid any scratches or damage to the vehicle.

Following the steps mentioned above ensures that the cover fits perfectly and provides the necessary protection.